Make supplied may vary
18m rotating telehandler
A 360 degree rotating telehandler with 17.9m lift height, for placing loads all around one set-up position.
Price and datesSpecification
Telehandler, side elevationDrawing not to scale
- Stowed size (L x W x H)
- 5.54m x 2.4m x 2.97m
- Machine weight
- 13,670kg
- Power
- Diesel
Telehandler, not a MEWP. Power: Diesel. Blank figures are not yet confirmed.
Where these figures come from
About this machine
A rotating telehandler (often called a roto) has its telescopic boom on a turret that turns a full 360 degrees. It sets up on four stabilisers and can then lift and place loads all around itself without moving, which makes it part telehandler and part crane.
It is not a MEWP or a cherry picker: it is built to lift materials, not people. What it can lift falls as the boom extends and rises, so every lift is planned from the machine's load chart, and lifting operations need a plan under LOLER.
Stowed it is 2.4m wide and 2.97m high, and 5.54m long to the fork face. On its stabilisers it needs 3.98m of width, so plan the set-up area as well as the route in.
Figures shown are the manufacturer's published figures for the Manitou MRT 1840 Easy, a common machine in this class. The make supplied may vary, so we confirm the exact machine and its figures with your quote.
Good for
- Placing materials on upper floors and roofs
- Lifts over buildings and scaffolds from one position
- Steel, cladding and roofing packs on large sites
Price and dates
Price on request
This machine is not booked online yet. Send us your dates and site postcode and we will reply with a price, or call us on 0333 038 4946.
Send an enquiry
Frequently asked questions
- What training does the operator need?
- Telehandlers are not MEWPs, so IPAF cards do not cover them. Operators must be trained and competent on the type of machine, which HSE's code of practice L117 covers. A rotating telehandler needs 360 slew training: on the CPCS scheme that is category A77 (Telescopic Handler 360 Slew), separate from the A17 card for fixed telehandlers.
- How high and how far can it lift?
- The published maximum lift height is 17.9m and the maximum forward reach is 15.1m, both on stabilisers. Capacity falls as the boom rises and extends, so check the load chart for your heaviest lift at its height and distance.
- How much can it lift?
- The published maximum capacity is 4,000kg, with the boom close in. At full height and reach it lifts far less, so we confirm the load chart with your quote.
- Can I use it indoors?
- No. It is a large diesel machine built for outdoor sites, and engine exhaust makes it unsuitable for enclosed spaces.
- How big and heavy is it?
- Stowed, it is 5.54m long, 2.4m wide and 2.97m high, and it weighs 13,670kg. Check doorways, gates, lifts and floor loading against those figures before you book.
- Is delivery included?
- Delivery and collection are priced with your quote, by your site postcode. Tell us the postcode and dates in the enquiry form on this page.
Reviews
No reviews yet.